Injection Molding Machine

/0 Comments/in , , , , , , , /by

ARBURG’s injection molding machines are renowned for their well tried and tested modularity. When it comes to the ALLROUNDER ALLDRIVE (A) series, the principle of modularity also applies to the drives.

The ALLROUNDER A offers the choice of combining the electric main axes with either electric or hydraulic auxiliary axes, depending on which solution is best suited to any specific application. 
The first example of the electric ALLDRIVE series is the ALLROUNDER 420 A 800-400. It has an 800 kN clamping force, 420 x 420 mm distance between tie bars, 400 series injection unit, screw diameters of 35, 40 and 45 mm as well as electric main axes and also an electrically driven five-point toggle system to provide the highest degree of positional accuracy. 
Following the successful introduction of the first ALLDRIVE machine, the series was expanded through modular drive technology to include larger clamping forces. As a result, at Fakuma 2003, which is being held from October 14 to 18 in Friedrichshafen/ Germany, the ALLROUNDER 420 A will for the first time be accompanied by its big brother, the ALLROUNDER 520 A with a clamping force of 1,600 kN. 

plastic molding
plastic molding

The Good injection molding machine A concept

The main functions of the injection molding machine – opening and closing moulds, injection and dosing – have been designed with electric drives as the basic structure. The other movements such as ejection and moving the nozzle and mould functions can either be electric or hydraulic, depending on the operating requirements. 

The movement of the mould closing operation is initiated by rotation of the servomotor to the five-point toggle system via a threaded spindle. This has been specially configured to the dynamic behaviour of the electronic drive.

The injection and dosing movements are converted with high torque via a gear position and a threaded pinion. To operate the movements with optimised use of time and low maintenance, the spindles are equipped with a special cool lubrication system. This ensures a high level of efficiency with low service costs and the longest possible service life. 

The machine series are modular in design due to the choice of auxiliary axes with electric or hydraulic drive. In this way, for example, the eject function can be carried out electrically, extremely accurately and dynamically with a spindle, or it can be carried out conventionally (‘softly’) with a hydraulic cylinder.

The nozzle advance movement, which in essence has a contact force applying function for most applications, is mostly with hydraulics or it can also be carried out electrically.
In ARBURG’s view it is very important that core pulls and specific special movements on the plastic mold, which have previously been integrated hydraulically, continue to be optimally operated with hydraulics in the future. For this reason, a special energy-saving small-accumulator hydraulic system has been developed for the optional hydraulic auxiliary functions on the machine, which can be assembled and dismantled on a modular basis.

Regulation

The basic structure of the electric axes ensures that they are highly dynamic and location-and position-regulated. This produces a reproducible, pin-point procedural sequence. This is mainly used for application with absolute and relative positioning accuracy for the mould and ejection movements.

In this way, for example, stroke-dependent functions such as mould positions in connection with core pull, or final positions when unscrewing, can be achieved extremely accurately.

As all stroke positions are measured absolutely, it is not necessary to carry out a reference movement or set them to a reference point.

On the injection side, the positioning accuracy and the acceleration in conjunction with the position-regulated screw movement can lead to additional accuracy with the injection molded parts. During dosage, the effect of the electric drive can be seen in the accuracy and in the energy requirement. 

When viewed on an individual basis, the options and potential for the improvement described, in conjunction with the well-tried and tested SELOGICA control system, lead to added value in relation to parts production.

The opportunity to operate individual cycle stages simultaneously adds even more importance to the programming of the SELOGICA control system. The appropriate cycle symbols with their comprehensive logistic links are extremely clear and can be used to optimise the procedures.

The synergistic effects of the ALLROUNDER A

During the development of the ALLROUNDER 420 A a great deal of importance was placed on the synthesis between the most up-to-date drive technology and tried and tested injection moulding technology.

In this way the design of the clamping areas ensures continued use of existing moulds. Furthermore, the daily operational practice is taken into account owing to the modular nature and the option of connecting hydraulic core pulls onto the plastic molds.

Flexibility through modular construction

The concept of electrically driven main axes as the basis and the option of freely combinable electrically or hydraulically driven auxiliary axes integrates the advantages of both systems. 

The machines have sufficient hydraulic power at their disposal precisely where it is needed, and they have the highest level of electro-mechanical accuracy coupled with economic energy consumption wherever feasible for the production task.

This means that the ALLROUNDER A machines also represent extremely flexible production systems, which always allow the machines to be equipped within an optimum cost/benefit framework, while at the same time precisely adapting them to the prevailing production requirements.

China Plastic Storage Box Mould

/0 Comments/in , , , , /by

Recently fast cycle time Plastic Food Storage Containers mould is very popular among clients as it could increase product ability. HYX MOULD is just the one which is specialized in making storage box mold and devoted to offer best mould to satisfied customers need.

We are the professional storage box mold manufacturer with rich experience. The main characteristic of our storage box mold is fast cycle time and that reach high reputation among clients.

Plastic molds
plastic molds

We made effort to achieve fast cycle time by doing below points.

  1. The application of Copper Beryllium lead the optimal cooling system and the stroke switch control make ejection demolding precisely.
  2. Hot runner system with 4tips or 1tip in reasonable position.
  3. Servo motor injection molding machine plays important role as its high performance.

If you are still looking for Chinese storage box molds, please give us a chance to establishing relationship with you.

Automatic Flip Closure Mold
HYX MOULD is well known as China closure mould manufacturer which is producing shampoo cap mould and toothpaste cap mold.

The most characteristic is that we are specializing in producing flip top cap mould with inside clothing. Use of this technology, the flip top cap is automatic demoulding. It saved cost and time. To some special requirements, plastic injection flip cap mould will adopt unscrewing system with motor or hydraulic cylinder rack ejection.

What is Plastic Injection Molding

/0 Comments/in , , , , , , , , , , /by

Injection molding is a molding procedure whereby a heat-softened plastic material is forced from a cylinder into a relatively cool cavity giving the article the desired shape. Injection molding is a manufacturing technique for making parts from the plastic material. Molten plastic is injected at high pressure into a mold, which is the inverse of the desired shape. The mold is made by a Mold Manufacturer China Company from metal, usually either steel or aluminum, and precision-machined to form the features of the desired part. Injection molding is very widely used for manufacturing a variety of parts, from the smallest component to entire body panels of cars.

The process of plastic injection molding



An injection molding machine consists of three basic parts, the mold plus the clamping and injection units. The clamping unit is what holds the mold under pressure during the injection and cooling. Basically, it holds the two halves of the injection mold together.

During the injection phase, plastic material, usually in the form of pellets, are loaded into a hopper on top of the injection unit. The pellets feed into the cylinder where they are heated until they reach molten form (think of how a hot glue gun works here). Within the heating cylinder there is a motorized screw that mixes the molten pellets and forces them to end of the cylinder. Once enough material has accumulated in front of the screw, the injection process begins. The molten plastic is inserted into the mold through a sprue, while the screw controls the pressure and speed.

The dwelling phase consists of a pause in the injection process. The molten plastic has been injected into the mold and the pressure is applied to make sure all of the mold cavities are filled.

Then the plastic is allowed to cool to its solid form within the mold. The clamping unit is then opened, which separates the two halves of the mold. An ejecting rod and plate eject the finished piece from the mold.

Extrusion

A machine used to extrude materials is very similar to the injection-moulding machine explained above. A motor turns a thread, which feeds granules of plastic through a heater. The granules melt into a liquid, which is forced through a die, forming a long ‘tube-like’ shape. The extrusion is then cooled and forms a solid shape. The shape of the die determines the shape of the tube.

Advantages of Injection Molding 



– High tolerances are repeatable 

– Wide range of materials can be used 

– Low labour costs

– Minimal scrap losses 

– Little need to finish parts after molding

Plastic Injection molding
Plastic Injection molding

Disadvantages of Injection Molding



– Expensive equipment investment 

– Running costs may be high 

– Parts must be designed with specific molding consideration.

Overview

Injection molding is a relatively new way to manufacture parts. It is a fast process and is used to produce large numbers of identical items from high precision engineering components to disposable consumer goods. Injection molding is often used in mass-production and prototyping. It produces such small products as bottle tops, sinks plugs, children’s toys, containers, model kits, disposable razors and parts of cameras. The process can even mould such large items as dingy hulls and kit car body shell parts.

What to know more about injection molding? Please go to
https://en.wikipedia.org/wiki/Injection_molding to take a look.

China Injection Molding Company

/0 Comments/in , , , , , , /by

The molding industry is growing from strength to strength thanks to the high-tech modern machines. These days, machines of extremely superior quality are being made which can provide a comprehensive solution to all your plastic molds and plastic molding needs. There are a number of top-notch companies engaged in the manufacture and supply of molding machines. You are advised to make your purchase through the internet. Internet is not just the safest place for any kind of molding purchase but is also the best place to look up for machines and plastic molding products.

HYX is an Injection Molding China Company that has carved out a cult status when it comes to producing plastic mold and molding products. The organization enjoys a clear advantage in the manufacture of machines that are superior in quality and low on prices. These machines are perfect for Chinese injection molding and will easily fit into your budget. The vehicle industry to relies a lot on these machines for automotive parts molding.

Some of the noteworthy features of these machines and molding services are discussed below:Chinese injection molding

  1. Durable: These machines, being of superior quality, are durable and enjoy longevity. That is to say, they can easily run for a number of years and do not get depreciated easily. Also, they have a long life which makes them long-term assets. Investing in these machines will certainly reap large dividends.
  2. Performance: These machines also score a point when it comes to performance. They are perfect for China Plastic Injection Molding Company and have a reputation for producing a number of units in a very short span of time. You can trust these machines to deliver the products very quickly and in a cost-effective manner.
  3. Energy efficient: These machines are energy efficient i.e. they save a lot of energy. Their power consumption is lower than that of sub-standard machines and therefore will give you financial advantage both in the short run as well as in the long run.
  4. Automotive molding: These machines are also used for automotive parts molding. Furthermore, these machines find use in a number of other industries including medical and toy industry.
  5. Less noisy: Another noteworthy feature of these machines is that they are less noisy. Unlike most machines which produce a lot of noise while running, the machines manufactured by HYX tend to produce less noise thereby allowing you to work in peace. HYX being a top China injection molding Company takes painstaking efforts to ensure that the machines are made using the latest technology and are hence less noisy.
  6. Speed: These machines also enjoy great speed. Compared to sub-standard machines, the machines by HYX last long and run efficiently yielding high performance.

Thanks to these machines, the Chinese injection molding industry is booming. They are used for the manufacture of anything from game pieces to surgical equipment. They are also used for automotive parts molding. For any type of molding product or service, HYX, the number one plastic China injection molding Company, in making plastic mold and plastic molding parts, we will be your best bet.

Plastic Mold Making

/0 Comments/in , , , , , , , , , /by

Plastic Mold Making

To achieve the desired mold productivity, many elements of plastic mold making and design must be intelligently incorporated. The basics of design for plastic mold making must be the starting point and then added to that, decisions made about a whole host of different design options must be made to work in concert with the basics to come up with an optimized mold design.Plastic Mold

Everyone is interested in having the lowest cost tool, but in plastic mold making, other considerations must also be included. Among these is the mould’s ability to be readily maintained, and kept in optimum condition throughout the mould’s useful life. A very low initial cost tool may prove to have a larger overall cost of operation; if for instance, lengthy maintenance procedures are required to keep the tool in operational condition throughout its life.

There are two general types of cavity and core inserts that should be considered when plastic mould making: Integrated and Nested or Split Structure. Each has its advantages and disadvantages, so the decision about which to choose when plastic mold making depends on the application and the required useful life of the mold.

Plastic Mold China is speeding to the world today, to make your business more successful, find a China mold company is more important.

Integrated Cavity

The integrated cavity is cut directly into the mold base plates. It requires the fewest number of parts and is the simplest to produce, so often (though not always) this is the least expensive to produce in terms of initial investment. However, as stated, this is not always the least expensive alternative when considering the cost of the tool over the life of the part.

Some of the Advantages of Integrated Cavity Mold Making include:

• More practical for large or odd-shaped parts, such as automotive body panels and similarly shaped parts.

• Least amount of machining – so lower initial cost.

• Least amount of mold materials used – so lower materials cost.

Conversely, some of the Disadvantages of Integrated Cavity Mold Making include:

• Requires larger, more expensive machines to make the molds, and no components may be made in parallel, so they often have a longer lead time to produce.

• Most costly, difficult and longer lead time to modify in the event revisions are required.

• Costly and difficult to repair with longer down times when the mold wears or is damaged during its useful life.

Nested Cavity

When making a nested cavity plastic mold, cutouts are made in the mold base to receive nested parts that form the mold cavities that produce the finished parts. While this has more components than the Integrated Cavity type, often the advantages of plastic mold making using this method far outweigh the disadvantages.Plastic molds

Advantages to using Nested Cavity plastic molds making:

Complex geometries may be more easily formed when using nested cavities, for example, multi-pin electrical connectors are nearly always made with nested cavity tools.

Improved materials may be more easily incorporated into nested cavity molds for reduced wear and improved mold temperature control ability.

Damaged or worn components can be quickly and inexpensively replaced to minimize downtime.

Some of the disadvantages of using Nested Cavity plastic mold making include:

• Higher initial material costs

• More machining required in some cases, as both the mold base and the cavities require precision manufacture. (However, most of the machining may be performed on smaller, faster and less expensive machines.)

Consult with your mold maker to decide which of these two different plastic mold making philosophies are most suitable for your specific application. if you want to know more about us please got to our home page to know more about us

Precision Injection Mold Making

/0 Comments/in , , , , , , , , , , , , /by

Precision Measurement And Injection Mold Making

It is remarkable that it is possible to open a package from Sweden, clean up EDM tool, and install it in an engine lathe spindle made in upstate New York, and indicate the run-out with a dial indicator made in Switzerland, held by a magnetic base made in Japan. This is amazing in itself, but the truly amazing thing is that it all works, quite well!

In this example, which actually happened to me, the run-out was less than .0001in/.0025 mm, right out of the box, first try. This is what precision tool measurement is all about.

The number of precision tools used by an injection mold maker are numerous. A partial list would include:

Precision measurement tools

  • Granite surface plate
  • Surface gage
  • Dial indicator
  • Height master/Cadillac gage
  • Gage blocks
  • Pin gages
  • Sine plate
  • Magnetic squaring block
  • Vee-block
  • Precision micrometers
  • Spin fixture

One of the more challenging aspects of building a mold is to have all of the various measuring tools calibrated to the same standard. This is why the EDM chuck from Sweden fit in the American lathe spindle: the accuracy was traceable to a common standard.

It doesn’t mean much if you are accurate within .0002 in., if your micrometer is off! It just won’t work. Shops need to have a master set of gage blocks that are traceable to the NIST, or National Institute of Standards and Technology. This is not as hard as it sounds, you just need to invest in a good set of gage blocks, not some made by child labor in a developing nation.

The proper care and use of these expensive tools is critical as well. They need to be treated with respect, handled carefully, kept free from rust and grinding grit. They need to have a clean storage place, with a grit-free surface on which to sit.

There are many places that you can cut costs in Plastic mold making, precision measurement tools is not one of them. It simply makes no sense to save money by buying a cheap dial indicator, for example. It is only going to haunt you in the long run. The same holds true for gage blocks, micrometers, squaring blocks, sine plates and so on.

With large items, such as the optical comparator or coordinate measuring machine, it is especially important to obtain a reliable tool. Valuable shop time can be quickly consumed with trouble-shooting a low quality machine. Not only that, but what if the measurements are unreliable? The mistakes can become extremely expensive and will quickly erase the initial savings.

Reliable precision measurement manufacturers

 Starrett Brown-and Sharpe Interapid Girod
 Etalon Mitutoyo Suburban Mahr
 Tesa Hermann Schmidt OGP Magnets
 Harig Micro-Vu Mitutoyo Zeiss

Insert Molding

/0 Comments/in , , , , , , , , , , , , /by

Insert Molding Advantages

Over the years, the technical advancements have taken place and instead of step-by-step manufacturing of products, there is manufacturing through one full-fledged process called insert molding . Certain industries still manufacture components through processes that include assembling discrete parts such as soldering, connectors, adhesives or fasteners. Molding through inserts is the perfect alternative to all such things and can benefit you in the following ways:

Decreased labour cost and assembly

Simply because various components are being joined or connected through thermoplastics, you can greatly bring down the assembly as well as labour cost with the help of this process.

Decreased weight and size

This process can yield smaller as well as lighter components by eliminating the need for connectors or fasteners. It merely blends the strength of metal inserts and resin.

Increased reliability

This process helps you in avoiding problems such as misalignment, part loosening, and improper termination as well as other problems. Every single part is secured tightly with the thermoplastic.

Design flexibility

Plastic Molding

Insert Plastic Molding

Another advantage of the insert molding process is that it gives you design flexibility. Designers love the unlimited configurations which can be used in insert plastic molding.

This process can literally allow you to reduce cost and experiment with the designs apart from getting other advantages as well. Most of all, it can allow you to save time and faults that might occur in manufacturing components otherwise. In a lot of ways, this process can be used by various industries to produce high quality and efficient components for all the purposes.

Plastic Molding Manufacturing

/1 Comment/in , , , , , , , , /by

Plastic  Molding Manufacturing

HYX Mold is a specialist in Plastic Molding Manufacturing since 1999. From China and sell plastic molds and plastic molding parts to the world, if there is a simple strategy that enables engineers to convert the plastics raw material into your idea product, the first thing we think will be Plastic Molding. In general, this operation is administered to the thermoplastic products, as they can certainly be melted, reconstructed or cast and then cooled down to provide a permanent and robust shape. Injection molding has become one of the most common processes of a majority of modern industries.

Cover anything from the food packaging market to as advanced as the automotive sector, Plastic Mold is becoming completely an integral part of almost all the businesses. This is a significantly useful and considerably less complicated method that can be accepted by all industries for producing items that they need. Injection molding is a process that is usually quite convenient in addition to one that can be highly complex too. It will be able to let you design and create almost all kinds of merchandise, whether they are simple or composite resin and this is achieved by using a fully intelligent procedure.

Thanks to the leading-edge technologies and devices, Plastic Injection Molding is becoming a lot easier and has simultaneously left no stone unturned to alter the knowledge of our modern day market sectors, above all manufacturing groups. You could certainly today see this process made use of in just about all the industrial sectors today and th

Plastic Molding Manufacturing

Plastic Molding Manufacturing

e broad practical application of plastic injection molding can substantiate this. The application of the plastic injection molding system is found in small tables, bottle caps, storage containers, musical instruments, wire spools, pocket combs, automotive dashboards and more plastic goods.

Even though deciding upon the process of Plastic injection molding, it is vital that the piece of equipment really should be selected wisely because unless and up to the point the piece of equipment works perfectly, you won’t have the capacity to achieve the accurate forms of the plastics. The evident move is that you can often talk to the supplier of the injection molding unit regarding it, nevertheless, there are particular rules that will assist you in understanding the decision criteria of the Plastic Injection Molding device. Specifically, there are three unique factors that should be structured upon and these would be:

· The mold

· The clamping unit

· The injection unit

plastic injection mould

plastic injection mould

The Plastic Injection Mold
It is necessary to make sure that the mold matches successfully and nicely on the clamping location. Height also with depth of this mold is required to be accommodated effectively with clamp stroke. There are actually specific other technical specifications that need to be kept in mind before you analyze the mold.

The Clamping Unit
Comprehensively understand that through the stage of plastic injection, the clamping unit should be secure enough to at all times keep the mold shut securely. It’s possible to see the particular sizing of the clamping unit from the vendor, which will also inform you of a variety of other items that ought to be identified when thinking about the clamping unit.

The Injection Unit
The responsibility of this specific component part is to deliver shot weight. The shot weight all in all really should never be in excess of 90% of the full injection capability of the device.

How To Make A Mold For Plastic Injection

/7 Comments/in , , , , , , /by

How To Make A Plastic Mold For Plastic Injection

If you want to learn how to make a plastic mold for plastic injection, be prepared for a concentrated effort! The skill required to build plastic injection molds is considerable and you must be prepared to diligently apply yourself, for quite a lengthy period of time.

However, if you are truly motivated and have basic machining skills, it is entirely possible to learn how to make a mold for plastic injection own.

You will, of course, need to learn about CNC milling, EDM machining, mold polishing, WEDM, CAD mold design and mold assembly. Many community colleges have evening programs where you can work, plus they have textbooks to teach you.

Learn how to make a mold for plastic injection

Generally, in the United States anyway, you must take classes, either at a technical college, or a night school. This is done in combination with working as an apprentice, usually for 4 additional years.

Personally, I completed a 2-year full-time course at a very good technical college in Minnesota. During this time I worked as a machinist in local shops. This is a great way to learn how to make a mold for plastic injection.

Upon graduation, I was hired as an apprentice Plastic mold maker. Because I had finished my classes, I was not required to take any evening courses. After registering with the state, we had periodic inspections of the type of apprentice work I was doing.

plastic mold | plastic injection mould

plastic mold | plastic injection mould

Probably this was to ensure that nobody was taking advantage of me and that I was receiving the agreed upon training. It also ensured that my pay was increasing over time, until I reached the “journeyman” level.

Skills needed to learn how to make a mold for plastic

 Listening

 Thinking

 Watching

 Imagining

 Milling

  Lathe work

  Grinding

 Drilling

 Geometry

 Trigonometry

 CAD

  Design

  Polishing

 Assembly

 Wiring

  Overtime

 EDM

WEDM

 CNC Milling

 Inspection

Time and space would not allow for anyone to attempt to explain how to make plastic molds for plastic injection on a website. It could be done as an ebook, though I have never seen one. There are several good books that explain the process in great detail, and, of course, there are textbooks available.

The best way to learn how to make a mold for plastic injection is to become an apprentice. If you already are an apprentice, you can learn a great deal from plastics journals, such as Mold making Technology and EDM Today.

Plastic Injection Molding Secret

/0 Comments/in , , , , , , /by

Finally, the rest of the company can secretly learn about plastic injection molding

Sometimes you just have to nod your head and pretend that you know what it is they are talking about. On the other hand, it sure would be nice to really understand how plastic injection molding works and what all those terms mean.

Often, terms like overmolding, two-shot molding, galling, hobbed-in, coined, toasted, NFG, shut-off, etc, etc, are just taken for granted. And usually, people don’t like to reveal that they just don’t know.
Really, it is in everyone’s best interest to truly have a fundamental grasp of the how and why of plastic injection molding. The explanations offered here are not technical, but rather a general idea of the concepts.

Some of the processes involved in plastics molding and mold making are easy to grasp, others are downright mysterious to an outsider. Click on any process below to learn more.

 What about EDM, or electrical discharge machining?

Of all the methods used to produce a plastic injection mold, EDM is the least understood. How can a non-technical person grasp it when you usually can’t even see what is going on? Since the workpiece is usually submerged in a tank of smelly, oily fluid, who could know what it’s all about?

The main reason to have a basic understanding of EDM is because it is the most essential process involved in plastic injection moldmaking. Before EDM, many operations were extremely difficult and time consuming.

Other names for EDM are: ram EDM, ED, spark erosion, and burner.

What about WEDM or wire electrical discharge machining? WEDM is sort of a cousin to EDM, in that it was developed quite a bit later. Wire EDM was originally thought to have a very limited application in plastic injection mold making, but it has proven to be indispensable.

Mold designers have become very creative in applying WEDM to build injection molds. In the not-so-distant-past, much of what is “wired ” was done on surface grinders. This was very tedious and difficult, requiring a high level of skill and expertise.

Much of what is done with WEDM was simply impossible otherwise. The shapes and contours attainable are sometimes only possible with this technology. go to one of the best mold manufacturer China home page to know more.