Over the past year, we’ve had many requests for technical seminars so we put together an impressive three-day course to be held this year in eight cities nationwide. Visit us for details. The new seminars, part of our Paulson Plastics Academy, specifically focuses on the fundamentals and science of injection molding automotive parts–ideal for anyone wishing to understand the plastic molding process. This certification seminar begins February 22-24, in California with a seminar held every month through to October. Plastics Pioneer and Paulson Training CEO, Don Paulson will be attending February’s seminar. If you haven’t met Don, this would be an ideal time to do so. He has developed several well-known Plastics processes and holds nine US patents. If you’ve always wanted to know the Hows and Whys of the Plastics molding industry here’s your chance. Register today. Seats are limited to 20.
New Electric Injection Molding Machine Course
Compare to injection molding automotive parts, electric molding machines now account for over 50% of new machine sales. There are several reasons for their popularity, more precise control, lower electricity consumption, and potentially faster cycles are among the reasons. But along with these and other advantages are potential problems. To avoid very expensive operating mistakes, these machines require knowledgeable personnel with a comprehensive understanding of this new technology. It was time we created an effective training course to address the growing demands of this new technology. We set to work creating new, robust graphics showing close-up details of the machine and controls; we assembled our filming crew and head out to a state-of-the-art processing plant to film the actual machine in use and of course, we applied our expert knowledge for the script of each lesson. In short, we’ve created a comprehensive three-lesson course including specifics in machine design, cycle and parts; effects of controls; and how to optimize electric machine settings and much, much more. We have some special pre-release offers going. Give us a call to learn more. Our new product ships on July 30, 2010. Give us a call we’d love to hear from you and are ready to answer any of your questions.
INJECTION MOLDING TRAINING: Basic Molding Machine Operations
This is an introductory injection molding training course describing molding machine parts and operation, operator responsibilities, safe practices and identifying part defects. It is ideal for all operators, entry-level employees, temporary employees, and even job candidates. Also available in Spanish.
- Lesson 1 – This plastics training lesson starts with an overview of the injection molding process, then covers basic material handling does and donts, machine part identification and standard operator responsibilities during the molding cycle. Emphasis is given to operating safety, protection of molds from damage, and proper plastic part handling.
- Lesson 2 – This plastics training lesson explains molding machine operations. It also discusses regrinding, trimming flash and degating plastic parts from runners. Employees are taught to identify common part defects such as short shots, flash, warp, surface defects and color changes.
Paulson School of Molding is fully interactive plastics training program introduces newcomers to technology using injection molding training with full motion video, text, audio and graphics animation.
THERMOFORMING
Servo Valves Give Smart Air, Oil, Vacuum Control
Electronically fired valves that control air, vacuum, or oil supply on a thermoforming unit normally have only two positions: open and closed. But the new Smart Valve from Lyle Industries Inc., Beaverton, Mich., is a servo valve that can be programmed for a continuous range of flow control from 0 to 100%. Microprocessor control of the valves permits saving valve parameters as part of the “recipe” for making a particular part. Lyle offers the Smart Valve as an option on its machines and also offers them for use on other units.
Cups Get Fast Lip Service
Roll lips on 500 to 5000 cups/min with the new LR-2000 lip roller from Brown Machine, Beaverton, Mich. The unit uses four curling screws powered by a single AC variable-speed drive. Screw distances can be adjusted for a different size cup (2 to 32 oz) in minutes using a micrometre-type adjustment. Brown says the new model is faster, more reliable, and easier to adjust than units with a single curling screw and helper roller.
Tooling
Tool Insert Degates In the Mold
A simple in-mold degating method for edge-gated parts has been developed by Cavity Balancing Systems (CBS) of Kitchener, Ont. The method relies on new Flush Trim Inserts, which are positioned near the gate to form lands encircling the gate region. When the parts are ejected, a nearby ejector pin causes a shearing action that breaks the part from its runner. Made from hardened tool steel, the low-cost inserts and the retaining pins that hold them fit into easily machined pockets and stepped holes. CBS estimates that the inserts will pay for themselves in reduced labor after 25,000 to 50,000 cycles.
New CAD Software Eases Mold Design & Inspection
A new suite of CAD/CAM tools for mold design and manufacture was shown at the recent K’98 show in Dusseldorf by Delcam of the U.K. (represented by Delcam International, Inc., Windsor, Ont.). Called Power Solution, the suite includes PowerShape 3D surface-modelling software, which automates injection mold design by generating plates, inserts, and hole layouts, as well as a bill of materials. “PowerInspect” software works with coordinate measuring machines to compare part dimensions with the original CAD model. “PowerMill” provides multi-axis 3D CAM capabilities.
DONGGUAN SINCERE TECH is located in Changping Town, Dongguan City, China. It only takes 40 minutes from Shenzhen Airport or Sekou Port to our factory. We enjoy convenient transportation in our city.
SINCERE TECH is known as one of the best mold manufacturers in China Companies and exporters for plastic molds for household articles, Plastic chair mould, overmolding, aluminum die casting, pallet mould, create mould, automotive mould and so on. Our moulds are mainly exported to Italy, Australia, Saudi Arabia, Jordan, Argentina, Colombia, India, Malaysia, Philippines and other 20 countries.
We have a full range of CNC machining centres, large gantry milling machines, vertical milling machines, CNC engraving Machines, electric spark(EDM), wire cutters, etc. We have advanced technology for CAD / CAM / CAE design and rich experiences in mould making. This makes us have great ability to manufacture big size moulds, complex moulds, deep-cavity moulds, thin wall moulds and high precision moulds.
We have a strong technical team. We have 5 senior designers and 20 engineers who have more than 15years experiences in mould making. Our designers are good at designing new products and mould structure. In order to avoid any defects during mould manufacturing, we usually do the mould flow analysis for the mould before we start the work on it. After mould flow analysis, we decide the mould injection gate and structure. Therefore, the mould can be finished successfully and smoothly.
Our current main business is as follows:
1) household moulds: plastic chair moulds, table moulds, buckets moulds, laundry basket moulds, trash bin moulds, kitchenware moulds, etc.
2) Industrial moulds we produce pallet mould, Plastic crate mould, paint container mould, etc.
3) Thin wall moulds we produce thin wall cup moulds, thin-wall tablewares molds, etc.
4) Pipe fitting moulds we produce PPR pipe fittings moulds, PE\PVC pipe fittings moulds.
5) Automotive parts: bumper mould, dashboard mould, etc.
6) packaging moulds: blowing mould, bottle mould, cap mould, etc.
Why will you choose us:
1. Good quality
2. Punctual delivery time
3. Competitive prices
4. Excellent after-sale service.
5. Professional communication with customers during the mould process.
6. We can provide the whole set of production line for injection moulding.
We always focus on perfection on quality and services. We would like to supply our best services and our best products for all the customers.
Please feel free to contact us by telephone, email or Messenger at any time if you are interested in our company. You are always welcome to visit our plastic mold company.
Let’s start our cooperation and create mutual benefits for each other soon!