Posts

HYX Plastic molding Company

/0 Comments/in , , , , /by

Unveiled at Fakuma 2002 was the HYX MOLD 820S with a 4000 kN clamping force, new
injection unit size of 3,200 and maximum shot capacity of 1,860 g polystyrene.

Need Plastic Molding Parts Manufacturing, go to our site page to know more, we provide you all of plastics solutions.

To a large extent, the customers’ desire to be able to rely on the well tried and tested HYX MOLD technology but with higher clamping forces has provided the impetus for the consistent expansion of the machine range over the last three years.

The HYX MOLD 630 S was successfully launched at Fakuma 1999 as the first example of the
large class machines. The launch of the HYX MOLD 720 S represented the second stage, which
ARBURG demonstrated for the first time at K ‘2001. And the success that the large class
machines have displayed so far shows beyond a shadow of a doubt that expansion of the machine
range was a move in the right direction.

It was at Fakuma that ARBURG set out to achieve higher clamping forces and it was here also
that it reached the goal it has been striving for, as the HYX MOLD 820 S made its world debut.

Impressive key data

In addition to the clamping force of 4,000 kN, other important key technical data of the large
HYX MOLD 820 S includes the new injection unit size of 3,200, the maximum shot capacity of
1,860 g PS, the 820 mm distance between tie bars and the availability of 70, 80 and 90 mm
screw diameters.

As with their smaller counterparts, all the technical details that distinguish each and every
machine in the S series apply equally to the three large HYX MOLDS, the 630 S, 720 S and
820 S… proven modularity, energy-saving and rapid hydraulics systems, an easy-to-change
injection unit, as well as a powerful clamping unit guided on four tie bars with a rigid and stable,
moveable mould platen supported by long guide bushes.

Similarly, a variety of injection unit sizes can also be selected for the large class machines: the
1,300 and 2,100 series units can be used on all three and the new 3,200 series unit is available
for the 720 S and 820 S.

Special features of the large class machines

In addition to all this, the large class machines also possess detailed technical solutions, the
practical values of which have already been strikingly demonstrated by the HYX MOLD 630
S.

These features include mould height adjustment for variable mould sizes, connection to
temperature control circuits and core pulls using rapid connect couplings in close proximity to
the mould, the swivel-out feature of the injection unit, and injection control as standard.

As an option, an hydraulic accumulator can also be installed, greatly increasing the injection
flow of the injection unit.

The fully automatic mould height adjustment feature of the HYX MOLD 630 S, 720 S and
820 S allows the entire clamping unit to be adjusted to suit the required mould height. This
involves the distance between the fixed and the movable mould platen being adapted to large
differences in mould height by a drive unit on the support plate.

With the new HYX MOLD 820 S the maximum mould/ platen distance is infinitely adjustable
between 1,050 and 1,550mm and stroke can be programmed using the central SELOGICA control
system.

The advantages of this are lower energy consumption and a reduction in the cycle times, as the
stroke is now only required to open the mould and not to level out large mould height differences.

By incorporating this adjustment option, it was possible to render the large HYX MOLDs’
mould clamp construction more compact. Accessibility to the mould from the machine’s
operating side has been designed with spaciousness in mind.

Well provided for

The temperature control circuits are fixed securely to both clamping platens by means of rapid
connect couplings which can be extended if required. The advantages are a clearer overview and
improved safety, as well as faster accessibility. In turn, this means that the mould can also be
reconfigured more quickly.

The two manifold blocks for the mould are positioned behind the machine guard so that all of the
mould’s supply lines can be securely attached. The temperature can be set from outside of the
guard while the machine is operating.

The supply lines for the core pull systems are also connected to the moveable clamping platen,
using rapid connect couplings, meaning that all the supply connections are located directly on the plastic mould.

Large, but still easy to handle

As with the HYX MOLD 630 S and 720 S, the HYX MOLD 820 S is being presented with a
new size of injection unit, the 3,200 series. In this case too, the plasticising cylinder has been
designed as a module that can be easily changed despite its size.

In the area of the nozzle, the cover on the large HYX MOLDs consists of two sliding parts. The
unit has sufficient stroke to extend far enough away from the fixed platen to ensure that the
nozzle is easily accessible should there be the need for work in this area.

The plasticising cylinder can be located centrally and all electrical connections are
coupled/uncoupled automatically during installation and removal.

The entire injection unit is supported on a central, rotating turret to facilitate cleaning and
changing of the cylinder or the screw.

This means that once the injection unit has been retracted and secured, it can be swivelled
forwards manually, allowing for the cylinder or screw to be removed without difficulty.

Caption: #1

With the HYX MOLD 820S with 4,000 kN clamping force and maximum shot capacity of
1,860 gramme polystyrene, ARBURG successfully concludes its expansion of machines with
higher clamping forces.

Sidebar heading

New motto : MODULARITY ALLROUND
ARBURG is starting the year 2003 with a bang … with a focus on program modularity

“MODULARITY ALLROUND” is the new motto which will cover all the injection moulding
machine construction company’s activities from this year onwards. With the presentation of the
4,000 kN machine at last year’s Fakuma in Friedrichshafen the three-year expansion program
has now been successfully completed.

Future activities will now be grouped under the new motto “MODULARITY ALLROUND”. This
describes the central focus of the company philosophy …the development of the ARBURG product
range. This motto stands for the future of the company in particular, without neglecting the
tradition of the HYX MOLD injection moulding technology, as ARBURG products have always
be known for their modularity.

MODULARITY ALLROUND … on a global basis
Due to the global focus of the ARBURG communication activities, the new motto will be used in both the original German form …MODULARITY ALLROUND…and in its English translation.

A special logo in the company’s colours will be launched alongside the motto, which will
pictorially represent the fundamental idea of modularity in an image that is impressive yet
simple and eye-catching.

Modular HYX MOLD
The modularity of the HYX MOLD can be seen in a variety of respects. This allows the
customer to put together a machine from the modular machine range which is customised with
respect to clamping force, injection unit or screw diameter.

Furthermore, ARBURG also offers a variety of drive concepts…the HYX MOLD C ‘advance’
special model and the ALLDRIVE machine series, with which electric and hydraulic drives can be
combined on a modular basis.

Modular MULTILIFT
With its MULTILIFT product range, ARBURG provides robotic systems which, thanks to their
modular construction, allow both the machine and the application to be designed appropriately
and to be integrated into the standard SELOGICA user interface.

Modular applications
The new ARBURG motto also describes the numerous HYX MOLD fields of application such the
encapsulation of inserts, the processing of several components, LSR, thermosets, powdered
materials and also PET for manufacturing preforms…HYX MOLDs can be used on a modular
basis due to special equipment variants.

In this way ARBURG offers its customers MODULARITY ALLROUND with respect to its product
range, thus allowing customers to design and use the products tailor-made to their applications.

The “New Dimension” has been completed
A target which, under the motto “hyx The New Dimension”, was unswervingly pursued was the extension of the machine range to include clamping forces of up to 4,000 kN.

The motto of the previous years also stood for the extension of the MULTILIFT robotic systems
product range, the structured provision with respect to electric or hydraulic drive variants…the keywords being the HYX MOLD C ‘advance’ special model and the ALLDRIVE machine series with modular drive technology…as well as for the increase in production area with the
construction of ARBURG II.

Plastic Mold Technology

/0 Comments/in , , , , , , , , /by

Plastic mold technology​

Plastic injection mold develops day after day. Each time, on exhibition, we can see that all manufacturers will exhibitor their newest and most advanced mould technology to attract customers. K fair in German is one of the most famous plastic industry exhibitions, there are many famous plastic injection moulds manufacturer will attend the fair and display their newest and most advanced plastic injection moulds. Besides K fair, NPE in America, Italy Milano PLAST, Plastic Magen in Mexico, Brazil last, Canton fair and Chinaplast, they are all world famous plastic injection moulds industry exhibition where can learn a lot of advanced plastic mold technology​.

In recent years, gas assistant molding system and RHCM (Rapid Heat Cycle Molding) are the top two advanced plastic injection moulds technology.

Plastic Mold

plastic mold

The gas assistant molding system

Gas assistant molding is a kind of new technology which brings the high-pressure air into plastic molding parts to let the plastic product with hollow section. Compare to traditional plastic molds​, it can reduce the weight of the product; realize thick wall and thin wall at the same time. The product surface will be more beautiful than traditional mould, without shrink mark, deformation and other molding defects. This kind of molding technology is more and more widely used in commodity products plastic injection moulds, household appliances product plastic injection moulds.

ST after some years’ research and development, it succeeds on gas assistance molding technology on various kinds product, such as for plastic chair, plastic handle and so on. Below is the picture of our design of a gas assistant chair for your reference.

Besides, injection machine and plastic injection mould, gas assistance equipment including Nitrogen Generator, pressure controller unit and air inlet parts.

RHCM (Rapid Heat Cycle Molding)

It is a kind of high speed and high-temperature molding technology. Put some Glass Fiber into plastic raw material to get the plastic product with high hardness and reflective surface. RHCM can remove the molding defects like melt line and flow mark which will appear in traditional plastic molding.

RHCM use high steam to make the mould cavity surface to reach the plastic raw material distortion temperature. Mould with high temperature ensures the good flow of plastic raw material; it makes the material fast flow and filled. It can avoid material to become more solid. This kind technology realizes no cooling molding and product with high glossy appearance without molding defects like deformation, melt line, flow mark, silver line. This kind of mould with short cycle time, reduce around 70% compared to traditional molding.

Plastic molds

plastic molds

RHCM mould have its advantage, it also have some disadvantages

  •  Mould steel will be easy crack
  •  Oil stain – As the mould temperature will be exceeding 130 ℃
  •  Gate area will appear white mark

Even though, RHCM technology is not widely used on market, but it will be a main technology in future as more and more customer require for high quality product, especially for outer parts. Nowadays, RHCM mould is mainly used in outer part product, like TV case and some automotive parts.​

If you want to know more information about plastic mold​​ and plastic mold technology, welcome to go to our mold blog http://mold.world.edu/, there are lots of plastic mold information to help you

Plastic Mold Making

/0 Comments/in , , , , , , , , , /by

Plastic Mold Making

To achieve the desired mold productivity, many elements of plastic mold making and design must be intelligently incorporated. The basics of design for plastic mold making must be the starting point and then added to that, decisions made about a whole host of different design options must be made to work in concert with the basics to come up with an optimized mold design.Plastic Mold

Everyone is interested in having the lowest cost tool, but in plastic mold making, other considerations must also be included. Among these is the mould’s ability to be readily maintained, and kept in optimum condition throughout the mould’s useful life. A very low initial cost tool may prove to have a larger overall cost of operation; if for instance, lengthy maintenance procedures are required to keep the tool in operational condition throughout its life.

There are two general types of cavity and core inserts that should be considered when plastic mould making: Integrated and Nested or Split Structure. Each has its advantages and disadvantages, so the decision about which to choose when plastic mold making depends on the application and the required useful life of the mold.

Plastic Mold China is speeding to the world today, to make your business more successful, find a China mold company is more important.

Integrated Cavity

The integrated cavity is cut directly into the mold base plates. It requires the fewest number of parts and is the simplest to produce, so often (though not always) this is the least expensive to produce in terms of initial investment. However, as stated, this is not always the least expensive alternative when considering the cost of the tool over the life of the part.

Some of the Advantages of Integrated Cavity Mold Making include:

• More practical for large or odd-shaped parts, such as automotive body panels and similarly shaped parts.

• Least amount of machining – so lower initial cost.

• Least amount of mold materials used – so lower materials cost.

Conversely, some of the Disadvantages of Integrated Cavity Mold Making include:

• Requires larger, more expensive machines to make the molds, and no components may be made in parallel, so they often have a longer lead time to produce.

• Most costly, difficult and longer lead time to modify in the event revisions are required.

• Costly and difficult to repair with longer down times when the mold wears or is damaged during its useful life.

Nested Cavity

When making a nested cavity plastic mold, cutouts are made in the mold base to receive nested parts that form the mold cavities that produce the finished parts. While this has more components than the Integrated Cavity type, often the advantages of plastic mold making using this method far outweigh the disadvantages.Plastic molds

Advantages to using Nested Cavity plastic molds making:

Complex geometries may be more easily formed when using nested cavities, for example, multi-pin electrical connectors are nearly always made with nested cavity tools.

Improved materials may be more easily incorporated into nested cavity molds for reduced wear and improved mold temperature control ability.

Damaged or worn components can be quickly and inexpensively replaced to minimize downtime.

Some of the disadvantages of using Nested Cavity plastic mold making include:

• Higher initial material costs

• More machining required in some cases, as both the mold base and the cavities require precision manufacture. (However, most of the machining may be performed on smaller, faster and less expensive machines.)

Consult with your mold maker to decide which of these two different plastic mold making philosophies are most suitable for your specific application. if you want to know more about us please got to our home page to know more about us

Precision Injection Mold Making

/0 Comments/in , , , , , , , , , , , , /by

Precision Measurement And Injection Mold Making

It is remarkable that it is possible to open a package from Sweden, clean up EDM tool, and install it in an engine lathe spindle made in upstate New York, and indicate the run-out with a dial indicator made in Switzerland, held by a magnetic base made in Japan. This is amazing in itself, but the truly amazing thing is that it all works, quite well!

In this example, which actually happened to me, the run-out was less than .0001in/.0025 mm, right out of the box, first try. This is what precision tool measurement is all about.

The number of precision tools used by an injection mold maker are numerous. A partial list would include:

Precision measurement tools

  • Granite surface plate
  • Surface gage
  • Dial indicator
  • Height master/Cadillac gage
  • Gage blocks
  • Pin gages
  • Sine plate
  • Magnetic squaring block
  • Vee-block
  • Precision micrometers
  • Spin fixture

One of the more challenging aspects of building a mold is to have all of the various measuring tools calibrated to the same standard. This is why the EDM chuck from Sweden fit in the American lathe spindle: the accuracy was traceable to a common standard.

It doesn’t mean much if you are accurate within .0002 in., if your micrometer is off! It just won’t work. Shops need to have a master set of gage blocks that are traceable to the NIST, or National Institute of Standards and Technology. This is not as hard as it sounds, you just need to invest in a good set of gage blocks, not some made by child labor in a developing nation.

The proper care and use of these expensive tools is critical as well. They need to be treated with respect, handled carefully, kept free from rust and grinding grit. They need to have a clean storage place, with a grit-free surface on which to sit.

There are many places that you can cut costs in Plastic mold making, precision measurement tools is not one of them. It simply makes no sense to save money by buying a cheap dial indicator, for example. It is only going to haunt you in the long run. The same holds true for gage blocks, micrometers, squaring blocks, sine plates and so on.

With large items, such as the optical comparator or coordinate measuring machine, it is especially important to obtain a reliable tool. Valuable shop time can be quickly consumed with trouble-shooting a low quality machine. Not only that, but what if the measurements are unreliable? The mistakes can become extremely expensive and will quickly erase the initial savings.

Reliable precision measurement manufacturers

 Starrett Brown-and Sharpe Interapid Girod
 Etalon Mitutoyo Suburban Mahr
 Tesa Hermann Schmidt OGP Magnets
 Harig Micro-Vu Mitutoyo Zeiss

Insert Molding

/0 Comments/in , , , , , , , , , , , , /by

Insert Molding Advantages

Over the years, the technical advancements have taken place and instead of step-by-step manufacturing of products, there is manufacturing through one full-fledged process called insert molding . Certain industries still manufacture components through processes that include assembling discrete parts such as soldering, connectors, adhesives or fasteners. Molding through inserts is the perfect alternative to all such things and can benefit you in the following ways:

Decreased labour cost and assembly

Simply because various components are being joined or connected through thermoplastics, you can greatly bring down the assembly as well as labour cost with the help of this process.

Decreased weight and size

This process can yield smaller as well as lighter components by eliminating the need for connectors or fasteners. It merely blends the strength of metal inserts and resin.

Increased reliability

This process helps you in avoiding problems such as misalignment, part loosening, and improper termination as well as other problems. Every single part is secured tightly with the thermoplastic.

Design flexibility

Plastic Molding

Insert Plastic Molding

Another advantage of the insert molding process is that it gives you design flexibility. Designers love the unlimited configurations which can be used in insert plastic molding.

This process can literally allow you to reduce cost and experiment with the designs apart from getting other advantages as well. Most of all, it can allow you to save time and faults that might occur in manufacturing components otherwise. In a lot of ways, this process can be used by various industries to produce high quality and efficient components for all the purposes.

Plastic Molding Manufacturing

/1 Comment/in , , , , , , , , /by

Plastic  Molding Manufacturing

HYX Mold is a specialist in Plastic Molding Manufacturing since 1999. From China and sell plastic molds and plastic molding parts to the world, if there is a simple strategy that enables engineers to convert the plastics raw material into your idea product, the first thing we think will be Plastic Molding. In general, this operation is administered to the thermoplastic products, as they can certainly be melted, reconstructed or cast and then cooled down to provide a permanent and robust shape. Injection molding has become one of the most common processes of a majority of modern industries.

Cover anything from the food packaging market to as advanced as the automotive sector, Plastic Mold is becoming completely an integral part of almost all the businesses. This is a significantly useful and considerably less complicated method that can be accepted by all industries for producing items that they need. Injection molding is a process that is usually quite convenient in addition to one that can be highly complex too. It will be able to let you design and create almost all kinds of merchandise, whether they are simple or composite resin and this is achieved by using a fully intelligent procedure.

Thanks to the leading-edge technologies and devices, Plastic Injection Molding is becoming a lot easier and has simultaneously left no stone unturned to alter the knowledge of our modern day market sectors, above all manufacturing groups. You could certainly today see this process made use of in just about all the industrial sectors today and th

Plastic Molding Manufacturing

Plastic Molding Manufacturing

e broad practical application of plastic injection molding can substantiate this. The application of the plastic injection molding system is found in small tables, bottle caps, storage containers, musical instruments, wire spools, pocket combs, automotive dashboards and more plastic goods.

Even though deciding upon the process of Plastic injection molding, it is vital that the piece of equipment really should be selected wisely because unless and up to the point the piece of equipment works perfectly, you won’t have the capacity to achieve the accurate forms of the plastics. The evident move is that you can often talk to the supplier of the injection molding unit regarding it, nevertheless, there are particular rules that will assist you in understanding the decision criteria of the Plastic Injection Molding device. Specifically, there are three unique factors that should be structured upon and these would be:

· The mold

· The clamping unit

· The injection unit

plastic injection mould

plastic injection mould

The Plastic Injection Mold
It is necessary to make sure that the mold matches successfully and nicely on the clamping location. Height also with depth of this mold is required to be accommodated effectively with clamp stroke. There are actually specific other technical specifications that need to be kept in mind before you analyze the mold.

The Clamping Unit
Comprehensively understand that through the stage of plastic injection, the clamping unit should be secure enough to at all times keep the mold shut securely. It’s possible to see the particular sizing of the clamping unit from the vendor, which will also inform you of a variety of other items that ought to be identified when thinking about the clamping unit.

The Injection Unit
The responsibility of this specific component part is to deliver shot weight. The shot weight all in all really should never be in excess of 90% of the full injection capability of the device.

How To Make A Mold For Plastic Injection

/7 Comments/in , , , , , , /by

How To Make A Plastic Mold For Plastic Injection

If you want to learn how to make a plastic mold for plastic injection, be prepared for a concentrated effort! The skill required to build plastic injection molds is considerable and you must be prepared to diligently apply yourself, for quite a lengthy period of time.

However, if you are truly motivated and have basic machining skills, it is entirely possible to learn how to make a mold for plastic injection own.

You will, of course, need to learn about CNC milling, EDM machining, mold polishing, WEDM, CAD mold design and mold assembly. Many community colleges have evening programs where you can work, plus they have textbooks to teach you.

Learn how to make a mold for plastic injection

Generally, in the United States anyway, you must take classes, either at a technical college, or a night school. This is done in combination with working as an apprentice, usually for 4 additional years.

Personally, I completed a 2-year full-time course at a very good technical college in Minnesota. During this time I worked as a machinist in local shops. This is a great way to learn how to make a mold for plastic injection.

Upon graduation, I was hired as an apprentice Plastic mold maker. Because I had finished my classes, I was not required to take any evening courses. After registering with the state, we had periodic inspections of the type of apprentice work I was doing.

plastic mold | plastic injection mould

plastic mold | plastic injection mould

Probably this was to ensure that nobody was taking advantage of me and that I was receiving the agreed upon training. It also ensured that my pay was increasing over time, until I reached the “journeyman” level.

Skills needed to learn how to make a mold for plastic

 Listening

 Thinking

 Watching

 Imagining

 Milling

  Lathe work

  Grinding

 Drilling

 Geometry

 Trigonometry

 CAD

  Design

  Polishing

 Assembly

 Wiring

  Overtime

 EDM

WEDM

 CNC Milling

 Inspection

Time and space would not allow for anyone to attempt to explain how to make plastic molds for plastic injection on a website. It could be done as an ebook, though I have never seen one. There are several good books that explain the process in great detail, and, of course, there are textbooks available.

The best way to learn how to make a mold for plastic injection is to become an apprentice. If you already are an apprentice, you can learn a great deal from plastics journals, such as Mold making Technology and EDM Today.

Plastic Injection Molding Secret

/0 Comments/in , , , , , , /by

Finally, the rest of the company can secretly learn about plastic injection molding

Sometimes you just have to nod your head and pretend that you know what it is they are talking about. On the other hand, it sure would be nice to really understand how plastic injection molding works and what all those terms mean.

Often, terms like overmolding, two-shot molding, galling, hobbed-in, coined, toasted, NFG, shut-off, etc, etc, are just taken for granted. And usually, people don’t like to reveal that they just don’t know.
Really, it is in everyone’s best interest to truly have a fundamental grasp of the how and why of plastic injection molding. The explanations offered here are not technical, but rather a general idea of the concepts.

Some of the processes involved in plastics molding and mold making are easy to grasp, others are downright mysterious to an outsider. Click on any process below to learn more.

 What about EDM, or electrical discharge machining?

Of all the methods used to produce a plastic injection mold, EDM is the least understood. How can a non-technical person grasp it when you usually can’t even see what is going on? Since the workpiece is usually submerged in a tank of smelly, oily fluid, who could know what it’s all about?

The main reason to have a basic understanding of EDM is because it is the most essential process involved in plastic injection moldmaking. Before EDM, many operations were extremely difficult and time consuming.

Other names for EDM are: ram EDM, ED, spark erosion, and burner.

What about WEDM or wire electrical discharge machining? WEDM is sort of a cousin to EDM, in that it was developed quite a bit later. Wire EDM was originally thought to have a very limited application in plastic injection mold making, but it has proven to be indispensable.

Mold designers have become very creative in applying WEDM to build injection molds. In the not-so-distant-past, much of what is “wired ” was done on surface grinders. This was very tedious and difficult, requiring a high level of skill and expertise.

Much of what is done with WEDM was simply impossible otherwise. The shapes and contours attainable are sometimes only possible with this technology. go to one of the best mold manufacturer China home page to know more.

Thermoset Injection Molding

/0 Comments/in , , , , , , /by

Thermoset Injection Molding

Thermoset injection molding is an automated process transforming granular material into molded shapes that Rebling Plastics has been performing since the company’s inception. It typically is the most economical way to mold thermoset materials.
Thermosets are materials that cure through a chemical reaction activated by heat and pressure, thus forming a strong molecular bond. This molecular bonding enables thermoset materials to maintain their physical properties at elevated temperatures which is why they are used in applications such as electrical connector housings, automotive ashtrays, and cookware appliance handles and knobs.

The thermoset injection molding process begins by adding granular or pelletized material to a hopper. The material is gravity fed into a barrel and screw, which heats and moves the material toward the mold. The material is injected into a hot mold which has been clamped shut under enough force to keep the mold together while the material is forced into the cavity under high pressure. The plastic flows through a runner system in the mold to reach all the cavities. When the mold cavities are filled, the parts cure to a solid form. The mold then opens for part removal, and some parts simply drop into a box, while others are removed by hand or automated equipment.

plastic molding | Plastic molds

plastic molding | Plastic molds

Thermoset vs. Thermoplastic Injection Molding

Unlike thermoplastic injection moulding, cured thermosets cannot be reground and mixed with virgin material for reprocessing. In general, thermoset materials have a low viscosity, so when the material fills the mold cavity under pressure, some of the material will leak between the two halves of the mold typically at an area of the cavity where vents have been added to allow for gas and air escapement. This is called flash. While this problem can normally be prevented in thermoplastic injection molding by proper mold construction and processing parameters, flashing cannot be avoided in thermoset injection molding. Therefore, flash must be removed as a secondary operation. When possible, the parts are de-flashed in an automatic tumbling operation rather than hand de-flashing to save costs.

Cycle times are longer for thermoset materials than thermoplastic materials due to the chemical reaction and cure that takes place in the mold. Since thermosets are more abrasive than thermoplastics, Rebling Plastics considerable expertise in mold design (including choice of tool steels, heat treating and plating requirements), as well as mold maintenance, will ensure a long lasting productive mold life.

Thermoset injection molding equipment

Thermoset injection molding presses ranging from 80 to 200-ton clamping pressure. Having these types of presses allows to make different sized parts with the option of making multi-cavity molds. In addition to the presses, we also use a variety of auxiliary equipment to keep molding costs down. Robots and sprue pickers are used to remove parts and runners from the plastic molds. Removing flash from the parts by sandblasting or automated feeding and tumbling is only an advantage.

Rapid Injection Molding

/0 Comments/in , , , , , , /by

Rapid Injection Molding

Rapid injection molding is exactly what the name implies, but multiplied by a factor of 10! It is hard to imagine that anyone could offer a service that can guarantee a fully functioning injection mold in a day or two, but that is actually the case.

This is precisely what rapid injection molding is all about. Rapid, as in very rapid! These molds are made of high-grade aluminum and can produce anywhere from a few parts to thousands.

Personally, I have worked on many aluminum molds that produce high-quality parts even after several hundreds of thousands of cycles. At first, I was highly sceptical, but after several years of making injection molding prototypes, It became routine.

plastic molding

rapid injection molding

How does rapid injection molding work?

It works by automating as much as possible in the plastic mold making procedure. By taking the customer’s 3-D model and automating the design and manufacture of the mold, the lead times are cut down to a fraction of the conventional process.

One of the central parts of the automation process lies in the design of the plastic part. By working with knowledgeable designers, many features, such as undercuts, can be minimized or eliminated.

Some of the features that must be considered are:

  • Part draft angles and radii
  • Ejection
  • Using straight pulls whenever possible
  • Simple approaches to side actions
  • The CNC milling process
  • Part size limits

What are the advantages of rapid injection molding?

  • A way to bridge the time gap between prototype and full production. If you need a working injection mold right now, this is the answer.
  • Short run production to get your product in the marketplace immediately.
  • Gives engineers a working model to approach a full-blown design for a production tool.

What are the disadvantages of rapid injection molding?

  • The aluminium molds are low production.
  • Works best for simpler parts with minimal side action and undercuts.
  • EDM machining is eliminated, thus some detail may be sacrificed.
  • The entire core and cavity are high-speed CNC machined, often on 5-axis CNC machines, therefore the design has limitations.

Is rapid injection molding expensive?

Surprisingly, the cost is quite reasonable, though there is always a premium to pay for extremely quick turnaround. Typically though, the cost is much less than might be expected. This is due to the highly developed automation process of this type of plastic injection mould making.

Conclusion

Rapid injection molding is a niche market segment of injection mold making. It serves a highly specialized marketplace, yet is very important within the niche. The ability to get your injection molded plastic part to market in a matter of days is very valuable to the right company.

Also, the ability to bridge the gap between prototype and high production is a very useful tool for custom injection molders.

A leading plastic mold company who is professional in rapid injection molding is plasticmold.net, in China. They have just about everything you might need when it concerns rapid injection molding.